Propane Generator Runtime Calculator

Estimate runtime from tank size, fill level, and propane consumption at your expected generator load. Enter the tank’s water capacity and its current fill percentage. Use the manufacturer’s consumption rating for the load you expect. This estimate assumes a constant load and consumption rate; actual runtime can vary with temperature, tank pressure, and generator operation.

Generator Power Factor Calculator

Calculate generator power factor from real power in kilowatts and apparent power in kilovolt-amperes. Use readings from the same operating point. Real power must not exceed apparent power; a result above 1 indicates inconsistent inputs. This calculation does not distinguish leading from lagging power factor.

Generator Load Percentage Calculator

Calculate the percentage of a generator’s continuous real-power rating used by connected loads. Enter running power in kilowatts; defaults are illustrative. This calculation does not account for starting surges, power factor, or derating.

Standby Generator Load Calculator

Estimate generator capacity from the running load of appliances used at the same time, the largest additional motor-starting surge, and a user-selected capacity allowance. Enter the surge above running watts, not the motor’s total starting watts. Defaults are illustrative. Actual starting loads, simultaneous starts, voltage, power factor, and generator ratings should be checked with a qualified electrician.

Inverter Generator Size Calculator

Estimate the generator wattage needed for appliances running at the same time, including the largest additional starting surge and a safety margin. Enter the total running watts and the largest starting-watt excess above that appliance’s running watts. Choose a generator with rated running watts at least equal to the running load with margin and rated peak watts at least equal to the result. Defaults are illustrative; check appliance and generator specifications.

Camping Generator Wattage Calculator

Estimate the generator wattage needed for appliances used at the same time. Add their running watts, then enter the largest additional starting surge above running watts for any one appliance. The estimate includes a running-load reserve and an optional generator output derating. Check both the generator’s continuous and starting ratings against your appliance requirements; defaults are illustrative.

RV Generator Size Calculator

Estimate the generator output needed for appliances you plan to run at the same time. Add their running watts and the largest extra startup surge, then include a reserve. Enter the extra surge above running watts, not the appliance’s total starting watts. Defaults are illustrative; check appliance labels and generator continuous and surge ratings.

Portable Generator Size Calculator

Estimate the minimum generator capacity for appliances running at the same time. Add their running watts, then enter the largest additional starting surge for any one appliance and a reserve margin. Compare the result with both the generator’s continuous and starting watt ratings, and choose the next available size up. Defaults are illustrative; check appliance labels or manuals for actual ratings.

Home Backup Generator Calculator

Estimate generator capacity from the total running watts of appliances you expect to operate simultaneously, plus the largest additional starting surge and a capacity margin. Check appliance and generator manufacturer ratings; defaults are illustrative. This estimate assumes only one major motor starts at a time and does not account for fuel type, wiring, or installation requirements.

Generator Total Ownership Cost Calculator

Estimate the total cost of owning a generator over a chosen period, including purchase and installation, fuel, and routine maintenance. Defaults are illustrative assumptions. This estimate excludes financing, major repairs, resale value, and changes in prices over time.

Generator Load Bank Calculator

Estimate the resistive load bank capacity needed to bring a generator to a target percentage of its rated real power. Enter any existing real load that will remain connected during the test. This estimate assumes stable loads and does not account for site derating or reactive load requirements.

Generator Surge Capacity Calculator

Estimate the generator surge wattage needed for connected loads. Enter their combined running watts and the largest additional startup surge for a single appliance, assuming appliances start one at a time. Defaults are illustrative; check appliance and generator ratings.

Generator Continuous Load Calculator

Estimate the generator’s minimum continuous power rating from the total running load and your chosen maximum loading percentage. Enter appliance running watts and any additional continuous load; defaults are illustrative. Check the generator’s continuous kW rating and allow separately for motor starting surges, power factor, altitude, temperature, and manufacturer derating.

Generator Battery Charging Time Calculator

Estimate how long a generator-powered charger will take to charge a battery using battery capacity, state of charge, charger output, and charging efficiency. Enter the charger’s actual DC charging current, not the generator’s AC current. This average-current estimate does not account for charging current tapering near full charge; actual charging may take longer.

Welding Generator Size Calculator

Estimate the generator capacity in kVA for a single-phase welder using its rated maximum input voltage and current, plus any simultaneous loads and a sizing margin. Use the welder’s input ratings, not its welding output current. Check the welder and generator manufacturer recommendations for starting loads, compatibility, and derating; select the next available generator size above the estimate.

Food Truck Generator Size Calculator

Estimate the generator’s continuous power rating from the appliances you expect to run at the same time, the largest additional starting surge, and your desired running-load reserve. Add appliance nameplate running watts, including cooking equipment, refrigeration, ventilation, and lighting. Defaults are illustrative. Select a generator with a continuous rating at least as large as the result, and verify its starting capacity, voltage, and circuit requirements with the equipment manufacturers.

Construction Generator Load Calculator

Estimate the generator capacity needed for tools operating at the same time. Enter their combined running watts and the largest additional starting surge, then add a reserve. Starting surge is the extra wattage above running watts, not the motor’s total starting wattage. Use equipment ratings and select a generator with sufficient starting and continuous capacity.

Generator Fuel Storage Calculator

Estimate the tank capacity needed for a generator using its fuel consumption rate, desired runtime, reserve, and usable tank capacity. Use the manufacturer’s consumption rate for the expected load. Defaults are illustrative; consumption varies with load and operating conditions.