Three Phase Generator Power Calculator

Estimate a balanced three-phase generator’s real electrical power from line-to-line voltage, line current, and power factor. Enter actual operating values or generator ratings; defaults are illustrative. The calculation assumes balanced sinusoidal loads and does not account for derating or starting surges.

Single Phase Generator Power Calculator

Estimate a single-phase generator’s real electrical output from voltage, current, and power factor. Enter the power factor for the connected load; the defaults are illustrative. This steady-state calculation does not account for motor starting surges or generator derating.

Generator Current Draw Calculator

Estimate the AC current drawn by a load from its real power, voltage, power factor, and phase configuration. For three-phase power, enter the line-to-line voltage and total power across all phases. This estimate assumes balanced three-phase loads and does not account for starting surges. Default values are illustrative.

Generator Cable Length Calculator

Estimate the maximum one-way copper cable length for a single-phase generator circuit based on an allowed voltage drop. Defaults are illustrative. This calculation uses conductor resistance at 20°C and excludes reactance, temperature effects, connections, and starting-current voltage drop. Check cable ampacity, overcurrent protection, grounding, and local electrical requirements separately.

Generator Extension Cord Voltage Drop Calculator

Estimate voltage drop in a copper extension cord using one-way cord length, load current, wire gauge, and generator voltage. The calculation uses conductor resistance at approximately 20°C and assumes a single-phase circuit with current traveling through two conductors. Actual drop can be higher when the cord is hot or under motor starting loads.

Electric Heater Generator Size Calculator

Estimate the minimum generator running capacity for an electric resistance heater and other connected loads, including any additional starting surge and a chosen reserve. Enter the heater’s electrical input rating from its label. The estimate assumes all loads can run and start at the same time; compare the result with the generator’s continuous rating and round up to an available generator size. Confirm that its starting rating, voltage, and outlets also suit your equipment. Defaults are illustrative.

Refrigerator Generator Wattage Calculator

Estimate the generator output needed to start a refrigerator while powering other loads. Enter the refrigerator’s running and starting watts from its specifications or a suitable measurement. The estimate assumes the other loads run when the compressor starts and applies a user-selected safety margin. Generator starting and continuous ratings must each be checked separately.

Sump Pump Generator Size Calculator

Estimate the generator wattage needed to start and run a sump pump alongside other loads. Enter the pump’s running and starting watts from its specifications or measurements. The result applies a chosen reserve to the larger pump demand plus other loads. Select a generator with sufficient starting and continuous wattage ratings, rounding up to an available size.

Well Pump Generator Size Calculator

Estimate the generator output needed to start a well pump while supplying other running loads. Enter the pump motor’s rated horsepower, estimated efficiency, starting-watt multiplier, other simultaneous loads, and desired reserve. Defaults are illustrative; motor starting requirements vary. Confirm the pump’s starting demand and the generator’s surge rating and voltage before buying.

Air Conditioner Generator Size Calculator

Estimate the generator capacity needed to start and run an air conditioner alongside other loads. Enter the air conditioner’s total starting watts and running watts from its specifications or measurements, plus the watts of other appliances operating at the same time. The result includes a reserve margin and is a conservative target for the generator’s continuous watt rating. Confirm that its surge rating also covers the starting load. Defaults are illustrative; actual requirements vary.

Generator Purchase Payback Calculator

Estimate simple payback from avoided annual costs and generator ownership costs. Enter your own estimates; defaults are illustrative. A result of 0 means annual savings do not exceed annual operating and maintenance costs, so there is no payback under these assumptions. This simple method excludes financing, taxes, inflation, and generator replacement.

Dual Fuel Generator Cost Calculator

Estimate the total purchase, installation, and fuel cost for a dual fuel generator over a chosen period. Enter the consumption rate and price for the fuel you expect to use: gasoline or propane. Defaults are illustrative; actual fuel use varies with electrical load. Maintenance, repairs, storage, and fuel price changes are excluded.

Generator vs Utility Cost Calculator

Compare the estimated monthly operating cost of generating electricity with the cost of buying the same energy from your utility. Defaults are illustrative; enter consumption and output figures for your generator under the expected load.

Generator vs Battery Cost Calculator

Compare estimated generator and battery costs over a chosen period. Enter purchase and installation costs, average annual use, and operating costs per hour. A positive result means the generator costs more; a negative result means the battery costs more. Defaults are illustrative. Include expected fuel, maintenance, charging, and replacement costs in your inputs as appropriate. This simplified comparison assumes constant annual use and hourly costs and excludes financing and the time value of money.

Generator Cost per kWh Calculator

Estimate the fuel and routine maintenance cost of electricity from a generator using its actual fuel consumption and average electrical output. Default values are illustrative; enter figures for the same operating load and fuel type. Fixed ownership costs are excluded.

Generator Maintenance Cost Calculator

Estimate annual generator maintenance costs using your expected service visits, operating hours, hourly maintenance allowance, and annual repair budget. Defaults are illustrative; actual costs depend on the generator and service schedule. Avoid double-counting supplies or repairs already included in the service price.

Generator Oil Change Interval Calculator

Estimate days until your next generator oil change using your manufacturer’s recommended interval and your recent average daily runtime. Enter hours since the last oil change, or since first use if the initial oil change is due. The estimate assumes steady daily use; check the manual for initial break-in, calendar-based, and severe-use maintenance requirements. Defaults are illustrative.